Microbial fuel cells for harvesting electricity

In the process of biological electricity generation, the two electrodes- anode (negative terminal) and cathode (positive terminal) are usually connected by conductive materials. Micro-organisms produce the electrons, after which transferred to cathode using electron mediators and nano-wires (Bose et al. 2018). Bioremediation is the process of using micro-organisms to neutralize or remove contamination from waste. However, nowadays it is also an important technique used to produce electricity from organic and inorganic matter catalyzed (Cookson 2011). Microbial Fuel Cells or Bio-Electrochemical Systems (BES) combine biological catalytic redox activity with abiotic electrochemical reactions and physics. However, in 1911, Potter deduced the idea of electricity generation using microbes. Furthermore, studies by Santoro et al. (2017) has led to the improvement of concept and practical developments. Thus, by using organic substrates, such as domestic wastewater, animal wastewater, oil wastewater, and wasted sludge microbial fuel cells, integrated with anaerobic and aerobic treatments using bacteria as catalysts. Therefore they can lead to effective bioelectricity generation (Bose et al. 2018).

Microbial fuel cells (MFC)

Microbial fuel cells are the bioelectrochemical devices that use microorganisms as catalysts in the conversion of chemical energy into electrical current. However, they are possible from organic compounds and equally responsible for simultaneous wastewater treatment. Different types of microbial fuel cells (Kumar et al. 2017);

  • Double-chamber (DCMFC)– It consists of an anode and a cathode separated by PEM. A defined anode substrate and cathode solution are used to generate energy.
  • Single-chamber (SCMFC) – It consists of one chamber that has both anode and cathode separated by PEM.
  • Upflow MFC – It is a cylinder-shaped MFC with cathode chamber at the top and the anode at the bottom.
  • Stacked MFC – It is a combination of some MFC that are either coupled in series or in parallel to enhance the power output.
Applications of Microbial Fuel Cells (Kumar et al. 2017)

Applications of Microbial Fuel Cells (Kumar et al. 2017)

List of organisms for harvesting electricity

System configuration
Geobacter SPP Two-chamber with carbon paper anode Jung & Regan (2007)
Betaproteo bacterium Two-chamber Zhou et al. (2011)
GeobacterSPP (Firmicutes) Two-chamber with carbon paper anode Jung & Regan (2007)
G. sulfurreducens Two-chamber with carbon paper anode Jung & Regan (2007)
Escherichia coli Single chamber with platinum and polyanilineco-modified anode Franks & Nevin (2010)
Escherichia coli Single chamber with composite electrode (graphite/PTFE) anode Pisciotta & Dolceamore Jr (2016)
Electrochemically active bacteria Two chamber (H-type MFC) with teflon treated carbon fiber paper anode Pisciotta & Dolceamore Jr (2016)
Mixed culture 2-chamber air-cathode MFC with graphite plate anode Rahimnejad et al. (2011)
Deltaproteo bacterium Two-chamber with graphite anode Bond et al. (2002)
Desulfurmonas SPP Two-chamber with non-corroding graphite anode Tender et al. (2002)
Escherichia coli Single chamber with graphite anode Park & Zeikus (2003)
Escherichia coli DCMFC with carbon paper with PPY-CNTs anode Pisciotta & Dolceamore Jr (2016)

Physiology of electrochemically active bacteria

A basic microbial fuel cell is, however, a double-chambered device consisting of anode and cathode separated by an ion exchange membrane (PEM or a salt bridge), connected to an external circuit (Bose et al. 2018). Furthermore, a biofilm of anaerobic bacteria acts as a catalyst and coated on the anode electrode immersed in an organic matter (fuel). Thus, it acts as an electron donor. Similarly, a biofilm may be optionally used in the cathode compartment but of a different bacterial species (typically aerobic) than anode (Rahimnejad et al. 2015).

However, the oxidation reaction takes place in the anode compartment and the reduction reaction in the cathode compartment.

  1. Fuel is oxidized by the bacteria, via degradative metabolism responsible for the release of energy. Thereafter generating free electrons, protons and other cations in the solutions.
  2. Furthermore, the transfer of electrons to the anode substrate.
  3. Electrons thus passed to cathode compartment via an external circuit.
  4. Lastly in the cathode compartment, migrated protons and electrons combine with oxygen forming water.
Schematic diagram of microbial fuel cells with PEM membrane (Bose et al. 2018)

Schematic diagram of microbial fuel cells with PEM membrane (Bose et al. 2018)

Three types of interdependent microorganisms cooperating in fuel degradation and electron transfer for electricity generation (Rinaldi et al. 2008)

Three types of interdependent microorganisms cooperating in fuel degradation and electron transfer for electricity generation (Rinaldi et al. 2008)

Due to the depletion of already existing energy sources marks the urgent need for alternative sources to overcome the energy crisis. However, microbial fuel cells are of different types and have different applications. The limitations comprise of high-temperature requirement and insufficient power generation to run a sensor or transmitter. Furthermore, biofuels and fuel cells are the future faces of new sources of energy without any pollution, unlike fossil fuels. Active biocatalysts, one of the newest energy forms of microbial fuel cells thus, helps to generate electricity.


  • Bond, D.R. et al., 2002. Electrode-reducing microorganisms that harvest energy from marine sediments. Science, 295(5554), pp.483–485.
  • Bose, D. et al., 2018. Energy Recovery with Microbial Fuel Cells: Bioremediation and Bioelectricity. Waste Bioremediation, pp.7–33.
  • Cookson, J., 2011. Bioremediation Engineering: Design and Applications. McGraw-Hill Education, p.524.
  • Franks, A.E. & Nevin, K.P., 2010. Microbial fuel cells, a current review. Energies, 3(5), pp.899–919.
  • Jung, S. & Regan, J.M., 2007. Comparison of anode bacterial communities and performance in microbial fuel cells with different electron donors. Applied Microbiology and Biotechnology, 77(2), pp.393–402.
  • Kumar, R., Singh, L. & Zularisam, A.W., 2017. Microbial Fuel Cells : Types and Applications. In L. Singh & V. Kalia, eds. Waste Biomass Management – A Holistic Approach. Springer, Cham, pp. 367–384.
  • Park, D.H. & Zeikus, J.G., 2003. Improved fuel cell and electrode designs for producing electricity from microbial degradation. Biotechnology and Bioengineering, 81(3), pp.348–355.
  • Pisciotta, J.M. & Dolceamore Jr, J.J., 2016. Bioelectrochemical and Conventional Bioremediation of Environmental Pollutants. Journal of Microbial & Biochemical Technology, 8(4), pp.327–343.
  • Rahimnejad, M. et al., 2015. Microbial fuel cell as new technology for bioelectricity generation: A review. Alexandria Engineering Journal, 54(3), pp.745–756.
  • Rahimnejad, M. et al., 2011. Power generation from organic substrate in batch and continuous flow microbial fuel cell operations. Applied Energy, 88(11), pp.3999–4004.
  • Rinaldi, A. et al., 2008. Engineering materials and biology to boost performance of microbial fuel cells: a critical review. Energy & Environmental Science, 1(4), p.417.
  • Santoro, C. et al., 2017. Microbial fuel cells: From fundamentals to applications. A review. Journal of Power Sources, 356, pp.225–244.
  • Tender, L.M. et al., 2002. Harnessing microbially generated power on the seafloor. , 20(August), pp.821–825.
  • Zhou, M. et al., 2011. An overview of electrode materials in microbial fuel cells. Journal of Power Sources, 196(10), pp.4427–4435.
Avishek Majumder

Avishek Majumder

Research Analyst at Project Guru
Avishek is a Master in Biotechnology and has previously worked with Lifecell International Private Limited. Apart from data analysis and biological research, he loves photography and reading. He loves to play football and basketball in his spare time with an avid interest in adventure and nature. He was also a member of the Scouts in his school and has attended Military training.
Avishek Majumder

Related articles


We are looking for candidates who have completed their master's degree or Ph.D. Click here to know more about our vacancies.